How do I hang my Aspect™?

For more detailed instructions click here

The Aspect comes with 3 ceiling hooks for easy installation.  Below are the instructions on how to hang your light.

1. Determine where and how you want the Aspect to be installed. Different methods of installation require different materials. We have additional installation materials available on our website.
2. For the most common installation, use the included white hooks. We recommend pre-drilling a small hole to help speed up the install. When hanging, use the larger ceiling hook directly above the Aspect unit and the smaller close to a wall for support.

CAUTION: Never attempt to use 3M hooks or Command hooks on the ceiling.

CAUTION: Do not install in a radiant heated ceiling or wall.

2a. (Optional) To install the Aspect through drop ceiling tiles, walls or other permanent structures, contact a qualified electrician.  By opening the power supply box or cutting the wire, you are voiding the warranty of the Aspect.  Follow all local laws and codes, including the National Electrical Code and National Fire Codes.

3. Using the Hanging Height section, determine the distance the Aspect should be hung above the canopy of your plant.
4. Program the included 24-hour outlet timer to give your plants a constant light cycle. Do not exceed 18 hours of light for any plant! See the Light Cycles portion of this manual for recommendations.
5. Plug the light in! Make sure the plug is not loose fitting in the outlet. If the outlet is loose, have a qualified electrician replace your outlet.